Fauna Garage Workbench October 13th, 2017 - 19:59:05
Every work area needs a pegboard that will accommodate a variety of things from tools and cords to tapes and work aprons. Be sure to install your garage workbench against a wall that leaves you enough room for a good-sized pegboard. If necessary supplement with additional boards elsewhere in the garage. Some workbenches are available with a built-in pegboard often located along the back of the bench.
You garage workbench will be more durable if you construct it with wood screws and bolts instead of nails which tend to work loose after a while and a wobbly workbench is not a safe carpentry setting. A very basic workbench consists of a wooden plank sized for your needs and Four evenly-cut two-by-fours which will be its legs. You can cut the legs to whatever length places the surface of the garage workbench at a comfortable height; a thirty-one inch high workbench work well for most people.
A common material for pre-manufactured workbench legs and supports is steel sheet. As we discussed in our previous article "A Handy Guide on Shelving Systems for the Home Garage and Workplace" the thickness of sheet metal is called its gauge and the lower its gauge number is the thicker the steel is. Steel sheet ranges from about 30 gauge to 8 gauge with thinner 30+ gauge material called foil and thicker 8 gauge or less material called plate. Typical workbench supports range from around 12 to 16 gauge. Stringers and lower shelves add stability and strength to the legs and allow for heavier loads to be applied.
Worktop surfaces come in many material and designs. Depending on the intended use one material may be more suitable than another. Common materials are steel wood solid plastic plastic laminate and others. Steel worktops are typical for heavy duty use. They will not become oil soaked or crack and are extremely tough. Mechanics and small engine repair shops favor this material as well as welders who might damage other work top surfaces. Disadvantages are scratching or denting if they are hit sufficiently hard. Wood tops can be made of solid hardwood like maple or made of plywood MDF or other manufactured wood material. Hardwood worktops resist damage by sharp tools and hard blows and is ideal for tool and die work electrical wiring fabric cutting and is favored by woodworkers.