Alacoque Garage Workbench October 12th, 2017 - 19:23:21
In addition to the main pieces of a workbench there are many add-ons that are used to increase utility. Back and End stops might be installed to prevent things from rolling off onto the floor. Drawers shelves and risers can be added for increased storage. Electrical power strips and outlet cutouts can be incorporated into the design as well to run tools grinders drill presses etc. Vises and clamps can also be added to help secure whatever you are working on. The best place to start when choosing a design is to define the intended use. Once that is established the support structure worktop add-ons and size can be more easily selected. There are literally thousands of available workbench designs and configurations many of which will suit your needs and budget. When in doubt contact your supplier for assistance selecting an appropriate design.
Workbenches in their basic form consist of a worktop surface and support legs. Two saw horses with a sheet of plywood laid across them can be defined as a workbench. This design may be suitable for laying out drawings or holding a few tools however without additional support it will not provide much more in the way of functionality or utility. Basic workbench design should include additional support structures and a strong worktop surface that will increase the load capacity of the workbench. The design may include support stringers lower shelves drawers back and end stops risers or any number of additional specialty attachments.
They do this by connecting the legs together below the worktop and forming a rigid structure that helps support itself. Without additional support the workbench legs would easily fold under and collapse when weight is applied. The design may favor stringers alone if the workbench is intended to be used while sitting allowing for the persons legs to extend under the worktop. Lower shelves may also be incorporated into the design for storage below the worktop surface and may be partial or full sized shelves depending on its use. Though load carrying capacities are frequently not listed on workbenches a general rule of thumb is to use a thicker gauge steel support structure for heavier duty workbench applications.
If space is an issue a fold-up garage workbench takes up little room when not in use. They are often designed with cabinet space to hang tools and hardware and the hinged bench folds into that space with its legs tucked under. When you need to work simply unfold the top prop up the legs and get to it. Select one with a leg system that is sturdy enough for your needs. Make sure to allow adequate space to work in when the bench is laid out.