Alexandrin Garage Workbench October 13th, 2017 - 20:17:32
If space is an issue a fold-up garage workbench takes up little room when not in use. They are often designed with cabinet space to hang tools and hardware and the hinged bench folds into that space with its legs tucked under. When you need to work simply unfold the top prop up the legs and get to it. Select one with a leg system that is sturdy enough for your needs. Make sure to allow adequate space to work in when the bench is laid out.
If there is one place in the house that is most suited for your craftsmanship it would be the garage. Some people opt for the basement but not all houses have that extra room. A garage is a more common part and it is where dirty jobs can be done simply because it does not need to be kept so clean all the time as compared to the other areas. Despite that you still need something to help you in order to make your job less stressful such as a garage workbench. Ideas and suggestions on the things to consider when choosing one are listed below to help you find the perfect furniture for the space you have.
Workbenches in their basic form consist of a worktop surface and support legs. Two saw horses with a sheet of plywood laid across them can be defined as a workbench. This design may be suitable for laying out drawings or holding a few tools however without additional support it will not provide much more in the way of functionality or utility. Basic workbench design should include additional support structures and a strong worktop surface that will increase the load capacity of the workbench. The design may include support stringers lower shelves drawers back and end stops risers or any number of additional specialty attachments.
A workbench should be higher than a desk as you must be able to stand and work comfortably with your arms bent at the right angle. Some experts suggest that the table tops height should be at the level of your navel or at the crease of your wrist. Others find it more comfortable and usable at a higher level. If you want extra work room and support consider the height of your table saw and place both together as a unit. You can set up a prototype bench by placing a sheet of plywood on some blocks in order to determine which height works best for you.