Calantha Garage Doors October 14th, 2017 - 21:59:26
Mission Garage Doors has a full line of wood doors that will accent any home. You can purchase an all wood Cedar Hemlock Oak or Redwood garage door that is customized to meet your design needs. Mission will also provide you will many examples of carriage garage doors that they have built and installed in the local area. It should be understood that a custom wood door will not have a higher initial cost but also high maintenance costs as well. In recent years the demand for weathered wood doors has increased.
Finding the right garage door for your home or business can require spending time on the Internet at the local home improvement stores and garage door retailer. Remember garage doors pricing is just one of many criteria you should use in making a door selection. Customer service warranty construction material design options are all important. One good source of both information and great garage doors is Mission Garage Doors.
In the past the biggest concern with operating an overhead garage door was the potential risks associated with the springs used for balancing the door weight. Pre mid 1960s garage door installations typically relied upon a pair of stretched (tensioned) springs to assist the operation of the garage door pivoting hinges. These springs became loaded (tensioned) as the door was moved into the closed position. Unloading (releasing) of the stored spring energy occurred as the door was opened to the horizontal overhead position. One of the most dangerous aspects of these spring systems was that after a period of time often without any maintenance or inspection the points of attachment of these springs would rust or become weak.
In response to the inherently dangerous old style garage spring issues as above a newer and safer system for opening the overhead garage door was created. The idea was to transfer the load or weight of the door via a cable and pulley system to a vertical rod now equipped with a torsion (twisted) spring. This type of spring is installed with specialty hardware and bolts to a fixed plate at one end while the entire spring is installed around a horizontal pipe. This load balancing device is normally installed directly over the header of the garage opening. Using appropriate cables connectors and pulleys the weight of the garage door is transferred into the torsion spring system. The difference between the old style stretched spring and the newer torsion spring is the way that the spring energy is stored. With the old style stretched spring the energy is stored and released by pulling on the spring or returning the spring to its un-stretched condition.