Alita Garage Doors October 10th, 2017 - 19:23:24
The Vintage Plus line of Delden Garage Doors is a very popular and affordable carriage door. The 25 gauge steel pre-painted doors are 2 inches thick insulated with polystyrene with a vinyl backing. They are reported to have an R-value of at least 6. Obviously these doors are not meant to be used in areas that have tough winters or where you are going to heat or cool your garage. One of the problems with using polystyrene insulated panels is that this type insulation leaves gaps which reduce the effectiveness of the insulation.
In terms of popularity and range of choices wooden garage doors come next to steel garage doors. However a wooden garage door is costlier than a steel garage door. Wooden garage doors need to be painted to prevent damage caused by water. They can withstand more wear and tear than steel garage doors. Wooden garage doors also have insulation options. If you want to have a customized garage door then a wooden one will be the best bet.
With a torsion type of spring the energy is imparted or removed by rotating the spring clockwise or counter clockwise depending upon the direction of usage. With professional installation the complete loading of the torsion spring is controlled by the garage installer and is determined by the weight and size of the garage door that it is operating. When this type of torsion spring fails it remains attached and intact to the location on the horizontal control rod where it was mounted. I have not heard of or seen any torsion spring fly across a garage creating injury from failed components as with the stretched older style garage door springs. This is not to say that injuries have not occurred with the torsion style spring. The installation of this type of spring is generally safe when left to a trained garage door installation professional. Severe and serious injuries have occurred when untrained unqualified individuals have attempted to install or service this type of spring.
In contrast to an overhead type of garage door be it sectional or single panel roll up doors have a totally different type of operating system. When these doors are used they can be concealed in an overhead or under mounted trough. These doors operate similarly to a roll top desk door except for how they are stored when not in the closed position. They normally coil as they are retracted and require significant gear trains to reduce the effort required to move these doors up and down into position. Often the forces needed to move these roll up doors require a reduction type of transmission that allows a very heavy door to be operated effortlessly.