Alexandrin Garage Workbench October 13th, 2017 - 17:43:18
Every work area needs a pegboard that will accommodate a variety of things from tools and cords to tapes and work aprons. Be sure to install your garage workbench against a wall that leaves you enough room for a good-sized pegboard. If necessary supplement with additional boards elsewhere in the garage. Some workbenches are available with a built-in pegboard often located along the back of the bench.
Workbench size height and mobility are also very important and vary by application. Sail makers may require very large work surfaces to spread out fabrics while jewelers and electronics repair shops may prefer smaller work tops for easy tool and parts access. The height also is important when choosing a design. Workbenches designed for standing work in general are higher than those intended for sitting. The worktop height is also dependent on the workers individual height. Many designs incorporate adjustable legs allowing for multiple heights application types and for leveling the worktop over uneven surfaces. For some applications mobility may be required so casters are installed allowing the workbench to be moved around. The best approach is to get a workbench that is sufficiently large for your needs has adjustable height for experimentation and is on casters if mobility is required for your specific application.
These are just some garage workbench ideas that you should take in consideration if you are in the process of choosing one. Just keep in mind that you are getting this furniture because you needed something to help you out when working you have a limited space and you need something that last. If you will focus on these things when deciding you can be assured that what you will get is something that is very useful and is worth your investment.
A workbench should be higher than a desk as you must be able to stand and work comfortably with your arms bent at the right angle. Some experts suggest that the table tops height should be at the level of your navel or at the crease of your wrist. Others find it more comfortable and usable at a higher level. If you want extra work room and support consider the height of your table saw and place both together as a unit. You can set up a prototype bench by placing a sheet of plywood on some blocks in order to determine which height works best for you.